UT6681 Aliphatic Polyurethane Topcoat (Outdoor)

1.Product description

This product is a two-component polyurethane topcoat with aliphatic isocyanate and hydroxy acrylic resin as base material, titanium dioxide and coloring pigment as pigment. With excellent hou resistance, light protection and color protection, paint film tough, good luster, not easy to powder, yellow, decorative, resistant to mineral oil, vegetable oil, oil solvent and petroleum products, with good chemical resistance, water resistance, impact resistance and wear resistance.

2.product usage

Suitable for large vehicles, train cars, locomotive, locomotive, yacht, ship, wharf, bridge, machine tools, instrumentation, food machinery and other advanced products or engineering of steel structure or aluminum alloy surface for high performance topface paint.

3.Product Features

4.Usage Instructions

5.Precautions

All tools must be thoroughly cleaned with polyurethane diluent after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 24 kg / set (Group A: Group B =20:4)