EP1812 Epoxy Zinc-rich Primer（60%）

1.Product description

EP1812 Epoxy zinc-rich primer（60%） is composed of epoxy resin as the base material, with poly amide resin as the curing agent, adding ultra fine zinc powder, additives and solvents. Because the paint film contains a large number of metal zinc powder, it has good cathodic protection; excellent rust resistance and durability, wear resistance, salt spray resistance; quick drying; excellent adhesion and impact resistance, extensive oil resistance and solvent resistance.

2.product usage

It is suitable for shipbuilding, Marine steel structure, bridge, tower, petroleum, refining, chemical and other industries of steel structure equipment surface as the most basic anti-rust primer, used for steel plate after sandblasting maintenance priming, can also be suitable for the anti-corrosion surface of jun physical characteristic plate.

3.Product Features

4.Usage Instructions

5.Precautions

All tools shall be cleaned with epoxy dilutions after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 28kg / set (Group A: Group B =2:3 )