EP2310 Epoxy Iron Red Primer

1.Product description

EP2310 Iron Red Epoxy Primer is a two-component epoxy anti-corrosion primer composed of epoxy resin, polyamide curing agent, iron oxide red, zinc yellow, additives, and solvents. It exhibits excellent rust resistance, durability, oil resistance, solvent resistance, water resistance, salt water resistance, and salt spray resistance. The product demonstrates superior adhesion and outstanding impact resistance. It shows excellent compatibility with epoxy and polyurethane topcoats while maintaining strong intercoat adhesion.

2.product usage

Suitable for use as an anti-rust primer on dock steel structures, heavy machinery, power machinery, chemical enterprises, mining machinery, and hydraulic steel structures.

3.Product Features

4.Usage Instructions

5.Precautions

All tools must be thoroughly cleaned with epoxy thinner after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 25kg / set (Main paint: curing agent =22：3)