ET5785 Epoxy Topcoat

1.Product description

ET5785 Two-component epoxy topcoat paint composed of epoxy resin, polyamide curing agent, titanium dioxide, coloring pigment, physical pigment, additives and solvent. The paint film has excellent adhesion, flexibility, wear resistance, shock resistance, water resistance, brine resistance, oil resistance, chemical resistance, durability and corrosion resistance, after a long time of exposure, the surface will be slightly pulverized, affect the appearance, but has little impact on the protective effect.

2.product usage

Used for epoxy zinc-rich primer and epoxy iron cloud - intermediate paint as a high-performance coating to protect steel structure, steel structure in contact with alkaline gas, reinforced concrete surface and water tank, oil storage tank floating roof as a high-performance protective coating.

3.Product Features

4.Usage Instructions

5.Precautions

All tools must be thoroughly cleaned with epoxy thinner after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 25kg / set (Group A: Group B =4:1)