WARP-06 Stabilized Waterborne Rust-preventive Primer

1.Product description

This product adopts the American RUst-X stabilized water-based product technology, which is made from the synthesis reaction of polymer film forming resin, RUST containing grass agent, rust transforming agent, metal cleaning agent, surface activator, binder, various additives and so on. After mixing the single component, apply the milky blue liquid directly. After brushing for 10 minutes, the film is transformed into a light black surface coating.

2.product usage

The coating is widely used in steel structure, metallurgical power, mining machinery, petrochemical, bridge, port and other low surface treatment with rust coating, reduce the coating cost, improve the coating efficiency, as the surface rust bottom coating.

3.Product Features

4.Usage Instructions

5.Precautions

All tools shall be cleaned with a dilution agent after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 10kg / barrel