WEZP-86 Waterborne Epoxy Zinc-rich Primer (60%)

1.Product description

This product is made of water-based epoxy zinc-rich primer composed of waterborne epoxy resin and zinc powder, containing more than 60% zinc, with electrochemical protection of steel, excellent rust prevention performance. Excellent mechanical properties, wear resistance, impact resistance, and has a good construction performance. Excellent product environmental protection products, no fire risk.

2.product usage

It is suitable for steel structure, bridge, iron tower, petroleum, smelting, chemical industry and other heavy anti-corrosion fields, and protects the base material after sandblasting treatment before construction of various coatings.

3.Product Features

4.Usage Instructions

5.Precautions

All tools shall be cleaned with clean water after use.

Referring to the product MSDS and follow the safety matters on the packaging label and local safety regulations.

Please provide personal protection including but not limited to the lungs, eyes and skin.

Prevent open fire, Please construct this product with good ventilation. Strong ventilation must be provided in narrow places or in places without air circulation.

Do not work out when the relative humidity of the air is greater than 80%.

Note the ambient temperature, winter type material is recommended for-5~15℃; 15~45℃ normal type, lower than-5℃ or higher than 45℃.

The surface temperature of the steel should be 3℃ higher than the dew point, and the construction time should be adjusted to the morning or evening when it is higher than 50℃.

Avoid construction in rain, snow, fog, sandstorm or strong wind, more pollution environment, to prevent paint film pollution.

Store in a cool, dry, ventilated place with a temperature not exceeding 40℃.

If accidentally swallowed or other direct contact with the product, seek medical treatment immediately.

6.Explain

The actual loss is affected by the work-piece shape, plate surface state, climate condition and coating method. The above technical data is based on the experiment and coating experience, because we cannot predict and control the many factors in the use of the product, so we only guarantee the quality of the product itself.

7.Packaging Specifications: 28kg / set (Group A: Group B =21:7)